New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Miami pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Miami Beach, FL | Hale Windows Miami
We provide independent Therma-Tru service across Miami Beach, from South of Fifth to North Beach. What makes our Therma-Tru work different here is simple: we know how salt spray, humidity, and the Historic Preservation Board change what a door needs. If you own a Therma-Tru Classic-Craft, Pulse, Smooth-Star, or Fiber-Classic in Miami Beach, we can service it, repair it, or replace it. Call (786) 442-1123 and we will put a written price in your hands before any work starts.
Why Miami Beach Residents Choose Us for Therma-Tru Service
Spencer Odell, who owns Hale Windows Miami, spent the better part of two decades running window and door installations across South Florida, including projects on the condo towers lining Brickell Avenue. He learned frame fabrication and weatherproofing at Los Angeles Trade-Technical College, and that training carries directly into how we handle Therma-Tru doors in Miami Beach’s salt-heavy environment. We are not a call center that dispatches whoever is available. Every technician we send is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before they knock. You know who is coming before you open the door. That is the Threshold Standard, and we hold to it on every Therma-Tru job in Miami Beach.
We are an independent Therma-Tru service provider. Not manufacturer-affiliated, not authorized, and not a franchise. That independence means we are not obligated to push a new door when a repair is the right call. We have serviced enough Therma-Tru doors in Miami Beach high-rises and historic Art Deco conversions to know exactly how their fiberglass skins, corner seals, and hardware react to salt spray, UV, and hurricane-driven rain. For more on how we approach the brand across product lines, see our Therma-Tru sales & service page.
Common Therma-Tru Windows & Doors Problems We Solve in Miami Beach
- Salt-air pitting on satin nickel hardware and hinges. On oceanfront Classic-Craft entries, the factory clear coat breaks down within two seasons of Miami Beach salt spray. The hardware starts pitting, then the hinges corrode and the door drags. We replace hinges with stainless equivalents and re-seal the perimeter with marine-grade caulk.
- Sagging or binding on Pulse series doors. Constant high humidity and thermal expansion cause the interlock weatherstripping on Pulse doors to bind. The slab sags just enough that the lock set misfits. We re-shim the hinges, adjust the interlock, and the door swings clean again. We do this regularly on condos along Collins Avenue.
- UV fade and micro-cracking on Smooth-Star skins. West-facing Smooth-Star doors in Miami Beach take brutal afternoon sun above 80% humidity. The factory finish loses bond without annual recoating, and the skin starts micro-cracking. We sand, prime, and recoat with a marine-grade finish rated for salt exposure.
- Warped corner blocks on Fiber-Classic jambs. We see this after repeated wind-driven rain from nor’easters and hurricane outer bands. The corner blocks swell and throw the frame out of square. Sometimes we can replace the corner pads. Sometimes the jamb needs full replacement.
- Obsolete OEM cam locks on mid-2000s Classic-Craft models. The original locks are no longer made. Where the door is otherwise sound, we install a machined stainless equivalent. Where it is not sound, we recommend full unit replacement to meet Miami-Dade impact code.
Therma-Tru Service in Miami Beach: What Local Conditions Mean for Your Equipment
In Miami Beach’s Flamingo Park and South of Fifth historic districts, the city’s Historic Preservation Board often requires that replacement Therma-Tru entry doors and impact windows keep the original recessed panel profiles. This is not a suggestion. It is a condition of the permit. So we regularly pair Classic-Craft fiberglass slabs with custom brickmold that mimics 1940s wood casings. We match the original steel profile spacing, the recess depth, the shadow lines. It is detail work that adds cost and time, but it is the only way the board signs off, and it is something you would never face across the bridge in Miami proper. If you own a pre-war condo in Flamingo Park, you are replacing a door to two standards: Miami-Dade County product approval and the preservation board’s aesthetic review. We have done both enough times to know which Therma-Tru models clear both bars without a fight.
Our team recently replaced a corroded Therma-Tru Fiber-Classic entry door at an oceanfront condo on West Avenue in Sunset Harbour. Salt spray had eaten the bottom corner seal, and the rusted hinge screws let the door drag on the threshold. We pulled the old slab, installed a new Therma-Tru Pulse unit with stainless hinges and a raised sill, and re-caulked the entire perimeter with marine-grade sealant. The door now closes with one hand and passed the owner’s wind-mitigation inspection. That is the standard we work to on every Miami Beach job.
Therma-Tru Models & Products We Service in Miami Beach
We service the Therma-Tru lines most common in Miami Beach: Classic-Craft in both the Mark and Rustic series, Pulse, Smooth-Star, and Fiber-Classic. We stock genuine Therma-Tru corner pads, adjustable sills, and factory-match weatherstripping for faster turnaround on the island. We default to genuine Therma-Tru parts because their dimensions and glass-fiber percentages differ from generics; a generic corner pad on a Fiber-Classic jamb will not seat properly, and that gap is where salt air gets in. For mid-2000s Classic-Craft models whose OEM cam locks are obsolete, we use a machined stainless equivalent only if the door is otherwise sound. Otherwise we recommend full unit replacement to meet Miami-Dade impact code. If your building is in a high-velocity hurricane zone, that code compliance is not optional. We also handle hurricane-proof front and entry doors, Miami Beach Window Replacement, and full frame replacement for Miami Beach homes and condos.
Therma-Tru Service Pricing in Miami Beach
What you will pay depends on what we find. Hardware replacement, re-shimming, and weatherstripping on a Therma-Tru door in Miami Beach typically runs $180 to $340. A full slab replacement with stainless hardware and marine-grade re-caulking starts around $900 and climbs with the model and finish you choose. Historic-district work in Flamingo Park or South of Fifth, where custom brickmold and board approvals are required, can push a full entry replacement to two or three times the cost of the same door across the causeway. A window that does not hold in a Category 2 is not a window; it is a frame waiting to fail. Our free estimate includes a written line-item price before any work begins, on every job, with no change orders after the fact. Call (786) 442-1123 to schedule a free estimate.
Serving Miami Beach, FL - Our Local Coverage Area
We’re based in the Miami Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Miami Beach
Yes, in most cases. If the bottom rail corrosion is limited to the seal and the slab is structurally sound, we cut out the damaged material, fill and seal it with a marine-grade compound, and replace the weatherstripping with genuine Therma-Tru parts. If the corrosion has eaten into the fiberglass structure itself, the slab is compromised and we will tell you. Call (786) 442-1123 and we will give you an honest read.
Because the fiberglass skin absorbs moisture differently than the wood core, and in Miami Beach’s sustained 80%-plus humidity, the slab swells just enough to bind against the jambs. Winter brings drier air and the door relaxes. The fix is usually a hinge adjustment and re-shim, not a new door. Call (786) 442-1123 for an exact diagnosis.
Some Therma-Tru impact-rated doors carry Miami-Dade County product approval, but not all models do, and it varies by series and glass package. We verify the exact NOA number on the door you are considering before we install anything in Miami Beach’s high-velocity hurricane zone. Call (786) 442-1123 and we will check the specific model.
You cannot stop it entirely on oceanfront Miami Beach properties. What you can do is replace factory hardware with stainless steel equivalents and re-seal the perimeter once a year with a marine-grade caulk. We carry stainless hinges, lock sets, and sill screws sized for Therma-Tru doors. Call (786) 442-1123 to schedule a hardware replacement.
Yes, but only if the door matches the original recessed panel profiles and trim work. We regularly pair Therma-Tru Classic-Craft slabs with custom brickmold that mimics 1940s wood casings in Flamingo Park and South of Fifth. The board has approved every job we have done this way. Call (786) 442-1123 to talk through your building’s requirements.
Service Areas Near Miami Beach
Hale Windows Miami serves Miami Beach and the surrounding area, including Miami Beach service area, Miami proper, Coral Gables, North Miami, and Hialeah Gardens. We also provide Therma-Tru service in Coral Gables and Therma-Tru service in Miami. Wherever you are, the same written price, the same photo-badged technicians, and the same 365-Day Done Right Promise apply.
Book Your Therma-Tru Service in Miami Beach Today
Call (786) 442-1123 to schedule your free estimate. We will send a named, photo-badged technician, put the price in writing before work starts, and stand behind the job with our 365-Day Done Right Promise. If it is not right, we make it right. No argument needed.
Written by Spencer Odell, Owner at Hale Windows Miami, serving Miami Beach since 2009.
Six Reasons Homeowners Choose Hale Windows Miami
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.