New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Miami pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Window Replacement: The Miami Owner’s Guide
If your PGT window has a failed seal, cracked glass, or a sash that won’t stay put, replacement is usually faster and cheaper than most people expect. Hale Windows Miami stocks PGT-compatible replacement parts and installs them for $220 to $680 per window, depending on the part and the series your window came from. We carry the common failure points on our trucks, so many PGT replacements in Miami are done the same day we diagnose the problem.
Most homeowners find the failure the way everyone does: a fogged pane that won’t clear, a crank that spins without moving the sash, or a window that suddenly whistles during an afternoon thunderstorm. The good news is that PGT windows are built for South Florida, and the parts that fail are almost always replaceable without pulling the whole frame out of the wall.
Key Takeaways
- Typical PGT window replacement cost in Miami: $220 to $680 installed
- We carry common PGT replacement parts on our service trucks
- Every job gets a written price before we start, with no change orders
- All work is covered by our 365-Day Done Right Promise
Which PGT Models This Applies To
PGT builds several window series that are common in Miami homes, and each uses slightly different replacement parts. The big three you’ll see in this market are the Spectrum, WinGuard, and Eze-Breeze lines, along with the older PGT Classics series that’s still in plenty of houses from the 1990s and early 2000s. WinGuard is the impact-rated line you’ll find on most of the coastal and flood-zone homes, while Spectrum shows up more in inland neighborhoods like Westchester or Kendall.
To identify what you have, look for the AAMA sticker on the side of the sash or the top rail. It lists the series name, the size, and the manufacturing date. If the sticker is gone, we measure the glass thickness and the frame profile, but for PGT specifically, the date matters. WinGuard parts made before 2010 use a different balance system than the newer versions, so that old sash from 2008 won’t accept the current replacement pivot bar. That’s the kind of compatibility gotcha that turns a 30-minute swap into a two-hour headache if you’re guessing at parts online.
On OEM versus aftermarket: PGT glass and structural components should be OEM, period. The glass is engineered to meet Miami-Dade impact standards, and a generic sealed unit won’t. For hardware like balances, locks, and crank mechanisms, quality aftermarket equivalents from the same suppliers PGT uses are often the honest choice, with the same look and function for less money. We’ll tell you which is which and put the exact part in writing before you pay for anything.
Hale Windows & Doors is an independent service provider, not affiliated with PGT Industries, but we install and service these windows every week across the area. We also stock parts for CGI, CWS, and ES Windows when homes have mixed brands, which happens more than you’d think after a few years of repairs.
Signs Your PGT Window Replacement Is Failing
- Fog or haze between the panes. This means the insulated glass unit, or IGU, has lost its seal. Miami’s humidity has made its way in between the two panes, and no amount of wiping from the outside will fix it. The only real repair is replacing the sealed unit.
- A sash that drops or won’t stay open. The spring-loaded balances inside the side jambs wear out with use and salt air. If you’re holding the window up with a stick, the balance cartridge needs replacement.
- Crank handle spins without opening the window. On PGT casement and awning units, the crank gear strips over time, especially if the hinges have gotten stiff. It’s a $45 to $90 part, but the window is useless until it’s swapped.
- Water or air coming in around the frame. If you can see daylight through the weatherstripping or feel a draft on a windy day, the seals have compressed past the point of doing their job. In Miami’s wet season, that’s a mold problem waiting to happen.
- Lock or latch no longer engages. Salt air corrodes the internal lock mechanism, especially on the WinGuard series that gets used every day. A worn lock also means the window won’t seal tight against wind, which matters when hurricane season shows up.
Replacement Cost & What’s Included
Here’s what PGT window replacement typically runs in the Miami market, installed by a specialist like us:
| Part / Service | Installed Price Range |
|---|---|
| IGU (insulated glass unit) replacement, standard size | $220 – $410 |
| IGU replacement, impact-rated (WinGuard) | $350 – $680 |
| Balance system replacement (per window) | $180 – $260 |
| Crank mechanism and hinge swap | $240 – $360 |
| Weatherstripping and seal replacement | $150 – $230 |
| Full sash replacement (non-impact) | $400 – $640 |
The range depends on the window size, whether the glass is impact-rated, and the series. WinGuard glass costs more because it’s laminated and carries the Miami-Dade NOA approval. What does not change is the way we price: you get a written quote before we order anything, and that’s the number on your invoice. No discovery fees, no change orders, no “we found something else” upcharges. Every replacement carries a written guarantee, and if it fails, the second visit is free.
DIY or Call Us?
Some things you can check yourself. A loose handle screw, obvious debris in the track, or weatherstripping that’s visibly torn are all things you can clean or tighten without special tools. If the window is just stiff, try cleaning the track with a dry brush before assuming the hardware is shot.
What you should not do is try to remove a sash that won’t stay up, or attempt to pull the glass out of a PGT frame. The balances are under tension, and the glass, especially impact glass, is heavy enough to cause real injury if it drops. If the window is held open with a stick and the balances are shot, that’s a two-person job with the right tools. Spencer Odell learned weatherproofing and frame work at Los Angeles Trade-Technical College, and the first thing that training taught him is that the piece you force is the piece that breaks. If you’re not sure, call us at (786) 442-1123 and describe what you’re seeing. We’ll tell you over the phone whether it’s worth a service call.
FAQs
Expect to get 10 to 15 years from PGT balances and hardware in Miami’s climate before something needs replacement. The salt air, humidity, and UV exposure all accelerate wear compared to other parts of the country. Impact glass itself can last decades; it’s usually the seals and mechanical parts that go first.
Sometimes, and we’ll tell you straight if that’s the case. A sticking crank can often be cleaned and lubricated, and a loose sash can sometimes be fixed by replacing just the pivot bar. But if the balance cartridge is worn or the IGU seal has failed, patch jobs don’t hold. Call us at (786) 442-1123 and we’ll give you an honest read.
Most single-part replacements, like a balance or a crank, take under an hour. Glass unit replacement takes an hour to an hour and a half once the unit is in hand. If we have the part on the truck, it’s one visit. If we’re ordering impact glass, that’s typically 5 to 10 business days.
We stock common PGT hardware, balances, and weatherstripping on our trucks. Impact glass is ordered per job because the size and spec vary by model and year. We’ll let you know what’s in stock when you call, and we’ll put the timeline in writing.
Call Hale Windows Miami for PGT Window Replacement
When a PGT window fails, the fix is usually simple and the price is usually less than you’re bracing for. Call us at (786) 442-1123 and tell us what you’re seeing. We’ll give you a written quote and, if you want us out, we’ll send a background-checked, photo-badged technician with a name and face you’ll know before the truck arrives. That’s our standard. It’s how we’ve worked since 2009, and it’s the same standard we bring to every window we open here in Miami.
Written by Spencer Odell, Owner, Hale Windows Miami at Hale Windows Miami, serving Miami and nearby areas.
Six Reasons Homeowners Choose Hale Windows Miami
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.