New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Miami pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Door Installation: The Miami Owner’s Guide
We install Mr-Glass door systems across Miami and typically complete a full door installation in 4 to 6 hours, with most jobs priced between $1,800 and $4,200 including the door, hardware, and labor. We keep common Mr-Glass replacement parts on our trucks, so if your door has a failed roller, hinge, or lock assembly, there’s a good chance we can handle it the same day we arrive. Most Miami homeowners find us because their Mr-Glass door has started grinding, sagging, or refusing to latch cleanly after years of salt air and humidity working on the hardware.
Mr-Glass doors are well-built, but in Miami’s climate, the rollers and locking points take a beating. Salt air corrodes the internal springs in the latch mechanism. Humidity swells the weatherstripping. And if the door faces direct afternoon sun on a west-facing wall, the frame expands and contracts enough to knock the panel out of square. The good news is that most of these problems are repairable with the right parts, which is where we come in.
Key takeaways:
- We stock Mr-Glass-compatible rollers, hinges, lock assemblies, and weatherstripping on our trucks
- Full door installations in Miami run $1,800 to $4,200 on average, written quote before any work starts
- Hale Windows Miami is an independent service provider, not affiliated with Mr-Glass
- Every repair and installation carries our 365-Day Done Right Promise
Which Mr-Glass Models This Applies To
Mr-Glass doors sold in South Florida generally fall into two categories: aluminum frame sliding doors and hinged terrace doors, both built to Miami-Dade impact standards. The parts differ between the two, and this is where we see the most ordering mistakes. A roller assembly for a Mr-Glass hinged door will not fit a sliding panel, even if the door widths match. The wheel diameter is different by about 4 millimeters, and the bracket holes don’t line up.
The quickest way to identify your exact Mr-Glass door series is to look for the label etched into the corner of the glass or printed on the top edge of the door frame. It will show a series number, usually something like MG-75 or MG-88 for the impact-rated lines, followed by the panel dimensions. If the label is worn off or painted over, measure the frame thickness at the edge, not the total depth of the door. Mr-Glass impact doors run 2¼-inch and 2½-inch frame profiles, while non-impact units are thinner. That number matters for replacement weatherstripping and lock hardware.
We install OEM Mr-Glass parts when the door is still under warranty or when the homeowner wants an exact match. But for older doors where the original parts have been discontinued, we use quality aftermarket equivalents that meet the same Miami-Dade specifications. We’ll tell you up front which route makes sense and show you the price difference before we order anything.
We work on Mr-Glass alongside PGT, CGI, and CWS door systems, so if your home has a mix of brands, one call covers it.
Signs Your Mr-Glass Door Installation Is Failing
- The door grinds or skips when you slide it. This usually means the roller bearings have worn flat spots or the roller housing is packed with sand and salt. You’ll feel it as a bumpy ride instead of a smooth glide. Replacing the roller assembly fixes it before the track gets scored.
- The door won’t lock or the handle feels loose. The multi-point lock linkage inside Mr-Glass doors is spring-loaded, and those springs corrode in Miami’s salt air. Once the linkage gets stiff, homeowners force the handle and strip the internal gears. A new lock assembly and handle set is the standard fix.
- Water puddles at the bottom track after rain. This is weatherstripping failure, often combined with clogged weep holes in the frame. The rubber seal shrinks from sun exposure, and wind-driven rain finds the gap. New weatherstripping and clear weeps solve most cases.
- The door sticks or rubs at the top corner. Aluminum frames shift on the house side, especially on homes with settling slabs. The door panel is still square, but the opening isn’t. We can often correct this by adjusting the hinges or rollers rather than replacing the door.
- You can see daylight around the door edge. The pile weatherstrip in the frame has flattened past recovery, which also raises your cooling bill. Replacing the weatherstrip restores the seal and keeps the rain and humidity out.
Replacement Cost & What’s Included
In Miami, Mr-Glass door installation pricing depends on what’s actually failing. Here’s what we typically see:
| Service | Typical Price Range |
|---|---|
| Roller assembly replacement (per panel) | $180 – $320 |
| Multi-point lock and handle replacement | $280 – $475 |
| Weatherstripping replacement (full door perimeter) | $150 – $260 |
| Hinge replacement or realignment | $220 – $400 |
| Full Mr-Glass door installation (impact-rated) | $1,800 – $4,200 |
Every quote is written and in your hands before we touch a tool. The price includes the parts, the labor, and any adjustment or cleanup. No change orders, no surprise line items at the end. When Spencer Odell reads a Mr-Glass rough opening, he measures it the way he’s done for two decades across South Florida, including the high-rise work on Brickell Avenue, so the number we quote is the number you pay. The single biggest variable is whether you need a full door replacement versus a repair. Impact-rated Mr-Glass panels cost more than non-impact, and if your door is near the coast, Miami-Dade code requires impact glass. We’ll tell you what’s required and quote it straight.
Every repair and installation carries our written guarantee. If the repair fails, the second visit is free. And if the work isn’t done right, the 365-Day Done Right Promise backs it: we make it right, no argument needed.
DIY or Call Us?
Some Mr-Glass door problems are safe to size up yourself. You can check whether the track is clogged with sand, whether the weep holes are blocked, and whether the screws on the handle have come loose. If cleaning the track and tightening the screws fixes the issue, great. But if the door still grinds, sags, or won’t latch after that, stop there.
The rollers and multi-point lock assemblies on Mr-Glass impact doors are under spring tension, and a snapped spring inside the lock or a roller housing that lets go while you’re prying on it can take a chunk out of your hand. These doors are heavy, often 180 to 250 pounds per panel, and removing a panel from the track without the right lifting equipment is how homeowners get hurt and frames get bent. A window that doesn’t hold in a Category 2 isn’t a window, it’s a frame waiting to fail. Same logic applies to the door hardware holding your opening together during a storm. If it’s binding or failing, call (786) 442-1123 and we’ll diagnose it on site.
FAQs
In Miami’s salt air and humidity, expect Mr-Glass door rollers to last 7 to 10 years and lock assemblies about the same before corrosion or wear makes replacement necessary. Coastal homes within a mile of the water often see failures a year or two earlier. Call (786) 442-1123 for an exact assessment of your door.
Most Mr-Glass door failures are repairable: rollers, hinges, locks, and weatherstripping are all replaceable parts, and we stock the common ones on our trucks. Full replacement only makes sense when the frame is bent, the glass is broken, or the door is old enough that parts are unavailable. Schedule a free estimate and we’ll tell you which route fits your door.
A roller or lock replacement on a Mr-Glass door usually takes 45 minutes to 2 hours depending on the part and the door’s condition. Most parts we can complete in a single visit since we carry Mr-Glass-compatible components on the truck. Call (786) 442-1123 to schedule a visit and confirm the part we’ll bring.
We stock the most commonly failing Mr-Glass parts on our trucks: roller assemblies, multi-point locks, handles, and weatherstripping for the standard Miami-Dade impact series. If your door requires a less common part, we order it and typically have it within a few business days. We’ll confirm availability before we schedule anything.
Get Your Mr-Glass Door Fixed Right
If your Mr-Glass door is grinding, sticking, or refusing to lock, don’t wait until it fails completely during a storm. Call (786) 442-1123 for a free estimate from Hale Windows Miami. You’ll get a written price before any work starts, a technician whose name and photo are sent to you before the visit, and a door that works the way it should. We’re an independent Mr-Glass service provider serving Miami and nearby areas, and we’ve been making doors and windows right since 2009.
Written by Spencer Odell, Owner, Hale Windows Miami at Hale Windows Miami, serving Miami and nearby areas.
Six Reasons Homeowners Choose Hale Windows Miami
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.