CGI Front Door Replacement Nationwide

CGI Front Door Replacement in Miami: What to Know First

CGI front door replacement in Miami typically runs $2,800 to $7,500 depending on the door slab, frame condition, and hardware, and most jobs take one full day once the door is on site. We’re an independent CGI service provider, not a manufacturer rep, which means we tell you when a component can be saved and when it can’t, and we put that in writing before any work begins. If you own a CGI front door that’s sagging, sticking, rusting at the corners, or failing to seal against Miami humidity and storm pressure, this page covers what actually happens and what it costs. Call (786) 442-1123 for a free estimate.

Call (786) 442-1123

Key Takeaways:

• CGI doors are built for hurricane zones, but Miami salt air and daily thermal swings create specific failure points we see every week.
• Replacement often costs less than you expect once we assess the frame; not every job needs a full tear-out.
• We quote a written price before work starts. If the number changes, you know why before we touch the door.
• Every CGI job is covered by our 365-Day Done Right Promise in writing.

How CGI Products Fail – and How We Fix Them

CGI makes serious impact-rated entry doors. But Miami has a way of finding weak points in even the best products. Here’s what we see on service calls across the city, from Kendall to Coral Gables to North Miami Beach.

• Sagging hinges on the Estate Collection. CGI’s Estate Collection doors use heavy-gauge steel or aluminum slabs that weigh more than standard entry doors. Over years of Miami humidity cycling, the hinge screws work loose in the wood or composite frame. The door drops a quarter inch, the latch misses the strike plate, and the deadbolt stops aligning. Our fix: we pull the door, re-set the hinge pockets with reinforced backing, and re-hang to factory clearance. If the hinge leaves are worn, we replace them with stainless, not plated steel.
• Corner seal separation on the Tribute Series. The Tribute Series uses extruded aluminum frames with welded corners, but the gasket channels at the bottom corners collect salt and sand from Miami’s coastal air. Once the gasket pulls away, you get daylight at the threshold and water wicking up into the door slab. We see this most often on east-facing doors in Brickell and Key Biscayne. The fix is a full slab replacement with fresh gasketing, not a caulk patch that fails in one rainy season.
• Rust bloom at the bottom rail on steel slabs. If your CGI door is steel and the factory paint got scratched during delivery or a move, Miami’s humidity plus salt air turns that scratch into rust bloom within 18 to 24 months. Once rust gets under the paint at the bottom rail, it spreads under the coating and the door needs replacement sooner than it should. We replace the slab and treat the frame opening with a rust-inhibiting primer before installing the new door.
• Thermal bowing on dark-colored doors facing west. Miami afternoon sun beats on west-facing entry doors, and dark finishes absorb that heat. We’ve measured surface temperatures over 160°F on charcoal and black CGI doors in Doral and Westchester. The slab can bow enough to break the weather-seal contact. Replacement with a lighter finish or a solar-reflective color solves it. We’ll tell you which colors hold up better on a west exposure before you order.
• Failed multi-point lock mechanisms on older CGI models. Older CGI doors with multi-point locking systems can develop a dead point in the gearbox, usually after years of forcing the handle when the door is slightly misaligned. Parts are available for most CGI lines, but if the lock body is discontinued, a new slab is more economical than rebuilding a retired mechanism. We stock common CGI lock bodies and rods; if we don’t have it, we source it same week.

Our CGI Front Door Replacement Process

Here’s how a typical CGI door replacement runs with us, from first call to the final walk-through.

1. 1
   Call and schedule. A live person answers at (786) 442-1123, 24/7. We ask about the door’s age, the symptoms, and which CGI line it is if you know. We set a visit window that works.
2. 2
   Threshold-verified technician arrives. Before the visit, you get the technician’s name and photo. The person at your door matches the person we sent. Background-checked, identity-verified, photo-badged. That’s the Threshold Standard, and it’s non-negotiable.
3. 3
   Diagnostic and measurement. We inspect the slab, frame, hinges, threshold, and weather-stripping. We measure the rough opening and check for water intrusion or rot in the sub-sill. Spencer Odell reads rough openings the same way he’s done for two decades across South Florida: fast, accurate, no guesswork on the numbers.
4. 4
   Written price, before work starts. You get a line-item quote covering the slab, hardware, any frame repair, haul-away, and labor. No verbal estimate. No “we’ll see when we open it up” pricing. If something changes once the old door is out, we stop and show you before going further.
5. 5
   Replacement day. We pull the old slab, prep the opening, install the new CGI or compatible impact-rated door, align the multi-point lock, set the threshold, and seal the perimeter with products rated for South Florida’s rain and humidity. Cleanup includes haul-away of the old door.
6. 6
   Test and guarantee. We cycle the door, check the deadbolt throw, run water over the threshold, and walk through operation with you. Every job carries our written workmanship guarantee, backed by the 365-Day Done Right Promise: if it’s not right, we make it right.

What CGI Front Door Replacement Costs in Miami

Here are honest ranges based on jobs we’ve completed in Miami and surrounding areas. Every price depends on the specific door, frame condition, and hardware.

• Slab-only replacement (frame is solid): $2,800 to $4,500. Includes new CGI or equivalent impact-rated slab, hinge re-setting, gasketing, and hardware transfer where possible.
• Full unit replacement (slab and frame): $4,200 to $7,500. Includes tear-out of the old frame, new pre-hung unit, threshold, interior and exterior trim work, and haul-away.
• Hardware upgrade (multi-point lock, deadbolt, handle set): $350 to $900 added to the door cost, depending on finish and lock type.
• Frame repair only (rot or corrosion, door is salvageable): $600 to $1,800, depending on how much sub-sill and jamb needs rebuilding.

What moves the price: door size (non-standard widths and extra-tall slabs cost more), finish (custom colors and woodgrain textures carry premiums), frame condition, and whether we’re matching an existing door style on a pair of entry doors. Miami homes with 8-foot door openings, common in older Coral Gables and Coconut Grove builds, may need custom slab ordering.

Call (786) 442-1123 for a free estimate with a written price before any work begins.

Why Miami Homeowners Call Hale Windows Miami for CGI Work

We started in 2009 and we’ve been doing windows and doors in South Florida ever since. We install and service eight professional lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That matters for one simple reason: if a CGI door isn’t the right answer for your opening or your budget, we can tell you what is, because we work with the full range of impact-rated products every day. We’re not pushing one brand; we’re matching the product to the opening.

Every job starts with a written price. Every repair comes with a written guarantee. If our repair fails, the second visit is free. And every technician who steps onto your property is background-checked, identity-verified, uniformed, photo-badged, and sent to you by name and photo before they arrive. The person at your door is the person we told you to expect.

The 365-Day Done Right Promise is stamped on every job we do. If the work isn’t right, we make it right. No argument, no negotiation, no pushback. Spencer Odell built this company on the idea that a door should close like it’s supposed to, hold out water like it’s supposed to, and stay square through hurricane season. A door that doesn’t hold in a Category 2 isn’t a door; it’s a frame waiting to fail.

FAQs