New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Miami pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Window Installation: The Miami Owner’s Guide
If you have an ES Windows window or door that needs replacement or installation work in Miami, we stock the parts and install them for a typical installed cost of $450 to $1,900 per unit, depending on size, frame material, and whether it’s a retrofit or full tear-out. Most ES Windows repairs are completed in one visit, but we never promise same-day service on installation work because pulling the old unit, flashing it correctly, and getting the new one to sit square takes the time it takes. You usually discover a failing ES Windows unit two ways: the crank or sash starts binding, or water shows up along the interior sill after a heavy South Florida downpour.
Which ES Windows Models This Applies To
ES Windows builds aluminum and vinyl window lines that show up across Miami condos, single-family homes, and mid-rise buildings, and the model matters more than the material. The compatibility gotcha most homeowners hit is this: ES Windows uses different channel depths and balance systems across its series, and a part that fits the Premium series often will not seat correctly in the Builder series, even if the visible measurements look close. Look for the silver ES Windows label on the frame edge or sash corner. If it’s worn off, take a photo of the corner joints and the lock mechanism and we can usually identify the series from those details. For OEM parts, ES Windows components are built to the original Miami-Dade NOA specifications, and we stock genuine OEM hardware for most current series. Where an aftermarket equivalent genuinely performs equal or better, we tell you before we order it, and the written price reflects which option you chose.
Signs Your ES Windows Window Installation Is Failing
- Water pooling on the interior sill after rain. This almost always traces to failed weatherstripping, a cracked sash corner, or a weep system that’s clogged with Miami’s fine limestone dust and pollen. Left alone, the water migrates into the drywall and subfloor.
- A crank or handle that spins without moving the sash. The gear inside the operator has stripped, common on units 10 years or older along coastal Miami where salt air accelerates metal fatigue.
- Visible condensation between the two panes. The insulated glass unit’s seal has failed. There’s no resealing it; the IGU gets replaced, and on ES Windows units we match the original glass package by thickness and coating.
- The sash no longer sits square in the frame. You’ll see uneven gaps at the top or bottom corners. This points to a broken balance shoe or a worn pivot bar, and it usually worsens in humidity cycles as the frame shifts.
- Exterior frame corrosion or flaking finish. On aluminum ES Windows frames near the coast, salt spray pits the finish and eventually the frame itself. The window may still operate, but the structural seal to your opening is compromised.
Replacement Cost & What’s Included
In Miami, a straightforward ES Windows sash or hardware replacement typically runs $450 to $900 installed. A full window unit replacement, where we pull the old frame and install and flash a new one, lands between $1,200 and $1,900 per opening depending on size, glass package, and whether the opening has water damage we need to repair first. The written line-item price you get from us includes the part, labor, disposal of the old unit, and the flashing and sealant work, so the number you approve is the number you pay. We don’t do change orders unless we open the wall and find something structural, and if that happens we stop, show you photos, and price the additional work before we touch it. Every installation carries our 365-Day Done Right Promise: if it is not right, we make it right, no argument needed.
DIY or Call Us?
Some things are safe to check yourself: look for visible cracks in the sash corners, clear debris from the weep holes along the bottom track, and note where exactly the water or binding appears so you can describe it to us accurately on the phone. What you should not do is attempt to remove an ES Windows sash or adjust the balance system yourself. The balance shoes and pivot bars on many ES Windows units sit under tension, and a wrong move releases that tension into your hands. Spencer Odell, our owner, will tell you the same thing: a window that doesn’t hold in a Category 2 isn’t a window, it’s a frame waiting to fail. If the frame is moving, let a trained installer look at it before the opening gets worse. Call (786) 442-1123, describe the symptom, and we’ll get the right technician to your door with the right part on the first visit.
FAQs
In Miami’s salt air and humidity, a well-installed ES Windows unit lasts 15 to 25 years before you’re looking at meaningful hardware or frame work. Coastal properties within a mile of the water tend to fall on the shorter end of that range. Call (786) 442-1123 and we can look at how your specific unit is aging.
Yes, if the failure is in the hardware – crank, lock, balance shoe, weatherstripping – we repair or replace the part, which is almost always the lower-cost fix. If the glass seal has failed or the frame is corroded through, replacement is the only honest path. We’ll show you the failed part before we touch anything.
A single sash or hardware repair typically takes one to two hours on site. A full window replacement runs half a day to a full day depending on access, building requirements like condominium work authorizations, and what we find behind the old frame. We give you a clear time window in writing when we schedule the visit.
We stock ES Windows-compatible hardware and common glass packages for most current series, and we also service parts across our other lines, including PGT, CGI, and CWS. If your part is not on our truck, we order it and handle pickup, warranty paperwork, and installation, so you never have to chase a supplier. Call (786) 442-1123 with your model number or a photo and we’ll tell you what’s in stock today.
Written by Spencer Odell, Owner, Hale Windows Miami at Hale Windows Miami, serving Miami and nearby areas.
Six Reasons Homeowners Choose Hale Windows Miami
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.