New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Miami pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Impact Garage Doors: The Miami Owner’s Guide
If you own a CGI impact garage door in Miami and a panel, roller, hinge, or spring has failed, we stock the replacement parts and can usually have your door working again within a day or two of your call. Typical installed pricing for most CGI garage door part replacements in Miami runs between $180 and $650 depending on the component, with full door replacements starting around $3,800. Most homeowners discover the problem the hard way: a grinding noise during a 7 a.m. commute, a panel that sits crooked after a storm, or a door that refuses to lift the morning after heavy rain soaked the tracks.
Which CGI Models This Applies To
CGI’s impact garage doors are built around their Sentinel and Estate collection lines, and the part you need depends heavily on which series your home has. The Sentinel line uses a heavier 2-inch-thick panel profile rated to Miami-Dade County’s high-velocity hurricane zone requirements, while the Estate series takes a lighter residential panel. The rollers and hinges are not interchangeable between the two, which is the single most common compatibility mistake we see when someone buys a generic part online and tries to make it fit. If you’re not sure which series you have, look for the silver CGI sticker inside the door frame near the top corner; it will list the NOA number and the panel thickness. Tell us that number when you call and we’ll match the part before our tech arrives. For springs specifically, we recommend OEM CGI or a quality aftermarket equivalent that matches the door’s weight rating to the pound. CGI’s spring ratings are marked by color code on the spring cone, and you won’t find that code on a generic replacement.
Signs Your CGI Impact Garage Door Is Failing
- Door sits uneven or one side sags when closed. Usually a failed torsion spring or a worn cable on one side. The spring carries the door’s weight, so when it fails, the door wants to lean and the opener starts fighting itself.
- Grinding or scraping noise during opening. Almost always dry or collapsed rollers, sometimes a bent track. In Miami’s salt air, the roller bearings corrode faster than they would inland, and the noise is the bearing telling you it’s done.
- Panel dented or split after a storm impact. Even impact-rated doors can take a hit from flying debris hard enough to compromise the panel’s integrity. Once a panel is split, the door’s wind-load rating is gone and it needs replacing before June 1.
- Door feels heavy or the opener strains. A worn spring loses tension over time. If you can lift the door manually with one hand, the spring still has life; if it takes two hands, the spring is failing and should be replaced before it snaps.
- Bottom seal cracked or daylight visible under the door. The seal keeps wind-driven rain and pests out. In Miami’s afternoon downpours, a failed seal means water pools in your garage and rust starts on the tracks and hinges.
Replacement Cost & What’s Included
Here’s what we charge in Miami for the most common CGI impact garage door repairs:
- Roller replacement (set of 8 – 10): $120 – $220
- Hinge replacement (each): $25 – $50
- Torsion spring replacement (pair): $250 – $480
- Cable replacement (pair): $150 – $260
- Bottom seal replacement: $90 – $160
- Impact panel replacement (per panel): $425 – $650
- Full CGI impact garage door: $3,800 – $7,200 installed, depending on size and series
Every price is a written quote before work begins. You’ll see the part cost, the labor, and the total before our tech touches a single bolt. The work carries our 365-Day Done Right Promise: if it isn’t right, we make it right, no argument needed. If the repair fails within a year, the second visit is free.
DIY or Call Us?
There’s exactly one part of a CGI garage door you can safely check yourself: the bottom seal. Look for cracks or gaps, and feel for daylight at the floor line. Anything else, and especially the torsion spring, is a job for a trained tech. The spring on a CGI impact door is under enough tension to remove fingers or worse if it releases wrong. We don’t write DIY instructions for springs, cables, or track work because we’ve seen the injuries that follow. If your door is making noise, sitting uneven, or the spring looks stretched, call (786) 442-1123 and let us send someone who does this every day.
FAQs
In Miami’s salt air and humidity, expect 7 to 10 years from springs and rollers, 10 to 15 from panels, and 5 to 8 from bottom seals if the door faces east toward Biscayne Bay. Coastal exposure shortens the window because salt corrodes bearings and spring hardware faster than inland air.
Yes, if the failure is isolated to a spring, roller, hinge, cable, or single panel. If multiple panels are compromised or the track is bent, replacement starts to make more financial sense. We’ll tell you straight which side of that line you fall on when we see the door.
Spring replacement runs 60 to 90 minutes. A single panel replacement takes 2 to 3 hours because of the re-tensioning and alignment work. We schedule in a half-day window so the job is done right the first time.
We carry the most common springs, rollers, hinges, cables, and seals on our trucks for CGI, PGT, CWS, and ES Windows doors. Panels are ordered to your exact size and series and typically arrive within 5 to 7 business days.
Hale Windows & Doors is an independent service provider and not affiliated with CGI. We’ve worked on their doors across Miami, from Brickell condos to Kendall homes, and we stock parts for them because we think they build one of the strongest impact doors on the market. When they wear down, we’re the ones who fix them right.
Call (786) 442-1123 to schedule your free estimate. A live person answers, and we’ll put the price in writing before any work starts.
Written by Spencer Odell, Owner, Hale Windows Miami at Hale Windows Miami, serving Miami and nearby areas.
Six Reasons Homeowners Choose Hale Windows Miami
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.