New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Miami pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
How Much Does Custom Window & Door Order Cost in Miami?
Custom window and door orders in Miami typically run $900 to $3,400 per opening installed, with most full-home projects landing between $8,000 and $28,000 depending on product line, glass package, and structural work required. High-impact hurricane-rated systems from brands like PGT or CGI push toward the upper end, while standard single-hung replacements sit at the lower end. The single biggest cost driver in Miami is whether you’re ordering impact glass (required for most coastal and many inland Miami-Dade homes) or standard glass, which can swing the price by 40% to 60% per window.
Key Takeaways
- Entry-level custom windows in Miami start around $900 per opening installed; premium impact systems run $2,500 to $3,400 per opening.
- Custom front doors range from $2,200 to $7,500 installed, with full-lite impact glass doors at the higher end.
- Miami-Dade County code requires impact-rated or protected openings on most homes built or renovated after 1994, and HVHZ (High Velocity Hurricane Zone) compliance is non-negotiable for permitting.
- Eight product lines give you genuine choice; the price difference between a basic PGT 2300 window and a premium ES Windows unit is roughly $500 to $900 per opening, and that money buys finer frames, better glass, and longer service life.
- Hale Windows & Doors writes the price before any work starts. You know the number before you commit, and the 365-Day Done Right Promise covers the work after it’s done.
Custom Window & Door Order Cost Breakdown (2026)
Here’s what we’re seeing across Miami-Dade as of 2026, based on projects we’ve quoted and completed in neighborhoods from Kendall to Aventura to Homestead. These are all-in installed prices per opening, including frame, glass, hardware, labor, and haul-away of the old unit.
| Product Type | Typical Miami Price Range (Installed, Per Opening) | Notes |
|---|---|---|
| Single-hung impact window (PGT 2300 or similar) | $950 – $1,450 | Most common entry-level impact unit; aluminum frame, single sash that moves |
| Horizontal slider impact window | $1,100 – $1,750 | Popular in Miami ranches and mid-century homes; larger sizes push higher |
| Casement impact window (crank-out) | $1,250 – $2,000 | Tighter seal, better for high-wind exposure like Key Biscayne or Miami Beach |
| Folding glass wall (per linear foot) | $1,800 – $3,200 | Luxury option for pool decks and waterfront homes; hardware quality drives price |
| Custom front door, non-impact (Therma-Tru or Mr-Glass) | $2,200 – $4,500 | Fiberglass or steel slab with decorative glass options |
| Custom front door, full-lite impact (CGI or ES Windows) | $3,800 – $7,500 | Impact-rated glass door with reinforced frame; HVHZ compliant |
| Sidelite pair added to front door | $1,400 – $2,800 | Pair of narrow glass panels flanking the door; often required to match door glass |
| Full-frame window replacement (vs. insert) | Add $250 – $500 per opening | Required when existing frame is rotted or out of square; common in 1960s Coral Gables homes |
These numbers are for product and standard labor. If your opening requires concrete lintel work, stucco repair, or a change in rough opening size, expect an additional $300 to $1,200 per opening depending on scope. Miami homes built before the 1970s frequently have non-standard sizes, and custom-ordering a window to fit an existing opening is almost always cheaper than reframing the wall.
What Drives Cost Up
- Impact glass packages. Low-E impact glass (a thin coating that blocks heat while letting light through) adds $180 to $400 per unit over standard clear impact. Tinted or gray glass for east- and west-facing exposures on Brickell or Miami Beach adds another $100 to $250.
- Second-story or difficult access. Plan for a 10% to 20% labor premium when upper-floor windows require scaffolding or ladder lifts, common in Coconut Grove’s multi-story homes.
- Permit and NOA paperwork. Miami-Dade requires a Notice of Acceptance (NOA) from the Florida Building Commission for every impact product installed. Legitimate products carry this; the paperwork and inspection run $150 to $500 depending on the municipality.
- Custom shapes and sizes. Arches, radius tops, and oversized picture windows cost 25% to 45% more than standard rectangles because the frame is fabricated to your opening rather than cut from stock.
What Drives Cost Down
- Standard sizing. If your opening matches a stock dimension, you avoid custom fabrication fees entirely. Many Miami mid-century homes have surprisingly consistent 36″ x 48″ and 48″ x 48″ openings.
- Ordering multiple openings at once. The labor setup cost per day drops when installers do eight windows in one visit instead of two. Most Miami homeowners see 10% to 20% savings per unit on larger projects.
- Choosing the right product line for the right room. You don’t need ES Windows in a laundry room. We match product to exposure, and honest matching saves real money.
What Affects Custom Window & Door Order Pricing in Miami
- HVHZ code requirements. Miami-Dade is the only High Velocity Hurricane Zone in the continental U.S. That means every window and door you order must carry NOA approval and meet Miami-Dade protocols. This is not a markup; it’s the law. Products without NOA will not pass inspection, period.
- Proximity to salt air. Homes east of US-1 in neighborhoods like Bay Point and North Bay Village take real corrosion abuse. Aluminum frames with marine-grade finishes or stainless hardware add $75 to $200 per opening but double or triple hardware life within 100 yards of the water.
- Glass package selection. Standard clear impact glass does the job. Low-E impact, laminated with higher STC ratings for noise, or climate-specific tints all add cost. In high-noise corridors near MIA or I-95, sound-rated laminated glass runs $200 to $400 extra per opening and is often worth every dollar.
- Existing frame condition. A house built in the 1950s in Shenandoah with original wood frames may need full-frame replacement rather than insert installation. That’s more labor, more stucco, more cost, and no honest contractor can give you a final number without seeing the opening.
- Door slab vs. full pre-hung unit. Replacing just the door slab on an existing sound frame is half the cost of a pre-hung unit. But if the jamb or threshold is rotted or out of square, which we see often in Little Havana’s older Spanish-style homes, you’re doing the full unit and should budget accordingly.
- Order volume and timing. Ordering during Q4 (October through December) gets you slower lead times from manufacturers, and occasionally a small price dip as factories clear year-end inventory. Ordering in peak season (May through July, right before hurricane panic buying) gets you longer wait times and sometimes higher prices from suppliers passing along demand.
How to Save on Custom Window & Door Order
Some of these savings are straightforward. Some require you to push a little. All of them hold up in the Miami market.
1. Know your openings before you call
Measure rough width and height of each opening you plan to replace, and note whether the current frame is wood, aluminum, or vinyl. When you call Hale at (786) 442-1123 with rough measurements, we can give you a ballpark range before any appointment, and a written flat price after we see the opening in person.
2. Order everything at once
Three separate orders of two windows each costs more in labor and setup than one order of six. If you’re planning to replace windows over several years, talk through phasing with us; sometimes financing or paying in stages but installing all at once is the cheaper path.
3. Mix product lines strategically
We carry eight professional lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. The right move is rarely “all premium” or “all budget.” Put ES Windows or CGI on the front elevation and high-stress openings, and PGT or ECO on the back and sides. You get the look and protection where it matters without overpaying everywhere.
4. Don’t skip impact glass where you actually need it
This is a savings tip, but an honest one. Replacing a non-impact window with another non-impact window in a Miami-Dade home that requires impact protection means you’ll install shutters or panels later, or fail an insurance inspection, or pay more when you sell. Getting impact now, in one shot, is cheaper than retrofitting later.
5. Ask for the written price before you sign
At Hale Windows & Doors, the written price goes in your hands before any work starts. Every time, every job. If a contractor won’t put the number on paper before your deposit, that’s a signal to walk. A legitimate quote has a number, a scope, and a name on it.
For a free estimate in Miami, call (786) 442-1123. A live person answers 24/7, so you’ll get a real conversation, not a callback queue.
FAQs – Custom Window & Door Order Cost
How much does a single custom impact window cost in Miami?
A single custom impact window in Miami runs $950 to $1,750 installed for standard sizes in aluminum frame lines like PGT or ECO Window Systems. Wider or taller units, casement styles, or premium brands like ES Windows push that to $1,800 to $2,600. Call (786) 442-1123 with rough dimensions and we’ll narrow it to a realistic range.
Is it cheaper to repair or replace a window in Miami?
If the glass is cracked but the frame is sound, repair is almost always cheaper: $180 to $450 for a glass replacement versus $950-plus for a full new unit. But once the frame is corroded, the seal is failed, or the unit is 15-plus years old and not impact-rated, replacement is the smarter money. We’ll tell you honestly which way to go, and the price is in writing either way.
How much does a custom front door cost in Miami?
A custom entry door in Miami runs $2,200 to $7,500 installed, with the split coming down to impact rating and glass area. Non-impact fiberglass doors from Therma-Tru run $2,200 to $4,500. Full-lite impact doors from CGI, Mr-Glass, or ES Windows run $3,800 to $7,500. Sidelites add $1,400 to $2,800 per pair.
How long does a custom window order take in Miami?
Custom orders typically arrive in 4 to 8 weeks depending on the manufacturer and season. PGT and CGI run 4 to 6 weeks for standard sizes; ES Windows and specialty shapes can run 6 to 10 weeks. Order before June if you want installation before storm season peaks.
Can you match existing windows in a Miami historic home?
Yes. In neighborhoods like Coral Gables, Coconut Grove, and Morningside where design review boards care about sightlines and profiles, we work with manufacturers who fabricate to match existing sightline widths and frame profiles. This costs 20% to 40% more than standard replacements due to custom fabrication, but it gets through review boards without a fight. We’ve done it, and the product exists.
Does Hale charge for estimates?
No. Estimates in Miami are free. The price you get is the price you pay, in writing, before any work starts. Call (786) 442-1123 and a live person will set you up with an appointment and a confirmed technician name and photo before anyone arrives.
The Hale Windows & Doors Difference on Custom Orders
Ordering custom windows and doors in Miami means trusting someone with the largest openings in your home. We take that seriously enough to put everything in writing.
Here’s how it works. When you call (786) 442-1123, a live person answers, day or night. You get scheduled, and before the technician shows up, you get their name and photo sent to you. That’s the Threshold Standard: every technician is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the visit. When someone knocks in a Hale uniform with a badge that matches the photo you were sent, you open the door knowing exactly who’s there.
We measure, we quote, and you get a written price before any work starts. No surprises. Then we order from one of eight product lines, PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, and we install to Miami-Dade and Florida code. Every job carries the 365-Day Done Right Promise: if the work is not right, we make it right. No argument needed. Every repair also carries a written guarantee, and if a repair fails, the second visit is free.
We’ve been doing this in Miami since 2009, independently owned and operated as part of the Threshold Group. In a market where windows are a structural system, not a cosmetic one, our job is to help you get the right product, the right price, and the right installation, with the certainty of a name and a photo before anyone walks through your gate. You can read more about our Custom Window & Door Order in Miami work, or head back to our home page to see the full scope of what we do.
Contact Hale Windows Miami for a Free Custom Order Estimate
Every custom job starts with a conversation and a measurement. Call us at (786) 442-1123 and you’ll speak to a live person right away, any time of day. We’ll schedule a visit, send you the technician’s name and photo before they arrive, and put the price in writing before any work begins. That’s how custom window and door ordering should work in Miami: with real numbers, real deadlines, and no surprises at the end.
Pricing reflects the Miami market as of 2026. Hale Windows Miami offers free estimates – call (786) 442-1123.
Written by Spencer Odell, Owner at Hale Windows Miami, serving Miami, FL since 2009.
Six Reasons Homeowners Choose Hale Windows Miami
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Hale Windows Miami Services
What Neighbors Say About Hale Windows Miami
What Our Customers Say
"Replaced eight old aluminum windows. The crew showed ID, wore shoe covers, and finished the whole job in two days. House is quieter and warmer."
- Barbara N."Fogged double pane in the living room. They replaced the glass units only, not the whole frame, and saved me a lot."
- Raul C."One sash would not stay up. He rebuilt the balance and now it slides like new."
- Yvonne T.